-
Specifications
-
Dimensions
-
Wiring
-
Z-Wave Configuration
-
Downloads
Specifications
Dimensions
Australian Standard
Design & Technology
Mounting
Package Inclusions
Installations
Power Requirements
Power Consumption Standby
Operational Temperature
Humidity
Warranty
Wireless Specifications
Wireless Range
Radio Protocol
Radio Signal Power
Radio Frequency
119 x 73 x 7mm. Depth: 36mm
Electrical Product Safety Approval Certification (SAA) Australia & New Zealand
Elegant Design with Haptic Touch Buttons
Sleek flush mount design
Touch Panel Switch + 2 Mounting Screws
No additional electical wiring (Neutral wire required)
110V to 240V. ~50-60Hz
< 0.5W
0c-40c or 32f-104f
0-40%
12 months
.
30m Indoors. 100m Outdoor.
Z-Wave
Max 1mW
921.4 MHz Au
Z-Wave Light Switch Inclusion & Exclusion Instructions (8-Second Button Press)
Follow these steps to include your Z-Wave light switch into a smart home controller:
Step 1: Enable Inclusion or Exclusion Mode on the Smart Home controller
- Open your smart home app or Z-Wave hub interface.
- Navigate to the Z-Wave settings and select "Add Device" or "Z-Wave Inclusion."
- Follow any prompts to put the hub in Inclusion or Exclusion Mode.
Step 2: Put the Light Switch in Inclusion or Exclusion Mode
- Ensure the light switch is powered on and within range of the Z-Wave hub.
- Press and hold the a button on the light switch for 8 seconds.
- The LED indicator on the switch may blink or change colour to indicate it has entered learning mode.
Homey Gateway Controller App Download our App to Include or Exclude Devices
Download the Product Installation Manual
Turn OFF electrical power before installing or servicing this product. Improper use or installation can cause SERIOUS INJURY, DEATH or LOSS/DAMAGE OF PROPERTY.
This device must be protected by a circuit breaker.
This device must be installed by a licensed electrician in accordance with all national and local electrical codes.
Connect only in accordance with the diagram presented in the manual. Improper connections maybe dangerous.
If you are unsure about any part of these instructions, consult a qualified electrician.
Using this product in a manner other than outlined in this document voids your warranty. Further, Smartlink Automation is NOT liable for any damage incurred with the misuse of this product.
Do NOT use a power screwdriver to install this device. If you do, you may overtighten the screws and strip them. Also, overtightening the screws may interfere with proper switch operation.
This is an electronic device with intricate components. Handle and install with care!
Smartlink Automation products based on Z-Wave technology provides many advantages when compared to similar smart Home systems.
Z-Wave is the leading smart home technology found in millions of products around the world. It is a wireless mesh technology that will not interfere with your Wi-Fi signal and operates on low power. When the technology is utilized inside everyday products such as locks and lights, these products become " smart " - giving them the ability to talk to each other and enabling you to control the devices and thus your home, from anywhere.
Z-Wave is a wireless radio frequency technology that lets smart devices talk to and connect with one another. Household products, like lights, door locks and thermostats are made "smart" when Z-Wave connectivity is added inside the product's design, giving them the capability to communicate and perform the desired functions that you want.
Z-Wave operates wirelessly and securely. The devices can be easily accessed and controlled remotely on your smartphone, tablet or computer so you can control your smart home from anywhere in the world! The Z-Wave hub receives a command from you via your smartphone, tablet, or computer and routes the command to the destination device.